herr_phil Posted January 9, 2017 Share Posted January 9, 2017 I can confirm that the KLN90 shows the "is not installed" error despite it working if you click on it and the correct (and fresh) x-plane 11 installation. Quote Link to comment Share on other sites More sharing options...
Felis Posted January 9, 2017 Author Share Posted January 9, 2017 I think i know what the problem with HDR lights. maybe one DataRef was changed, that i use to check if HDR is ON. Will check it. Also i need to check what happen with KLN and all other textures. because they look dimmed. Quote Link to comment Share on other sites More sharing options...
Speckfire Posted January 10, 2017 Share Posted January 10, 2017 Are the preset views working for anyone in XP11? Quote Link to comment Share on other sites More sharing options...
Mangouste Posted January 10, 2017 Share Posted January 10, 2017 (edited) ( resolved I have desactivate SmartScreen Windows10) Edited January 10, 2017 by Mangouste Quote Link to comment Share on other sites More sharing options...
tchou Posted January 10, 2017 Share Posted January 10, 2017 3 hours ago, Speckfire said: Are the preset views working for anyone in XP11? yes, they were on y machine, je sure to select your view to 3d cockpit with forward view first.. 1 Quote Link to comment Share on other sites More sharing options...
Felis Posted January 17, 2017 Author Share Posted January 17, 2017 Guess what? 3D lights has returned in XP11. Did a little workaround with lights system in cockpit. Will make a new pack soon. 6 Quote Link to comment Share on other sites More sharing options...
Felis Posted January 17, 2017 Author Share Posted January 17, 2017 https://yadi.sk/d/1qctW7_p39VWDe 4 Quote Link to comment Share on other sites More sharing options...
tchou Posted January 18, 2017 Share Posted January 18, 2017 Downloading it now, I'll try it tonight Thanks a lot sir !!! Quote Link to comment Share on other sites More sharing options...
Vagvag Posted January 18, 2017 Share Posted January 18, 2017 Kind of random question, but whatever happened to that facelifted cockpit project I have seen not so long ago? Quote Link to comment Share on other sites More sharing options...
tchou Posted January 19, 2017 Share Posted January 19, 2017 Hi, Felis, just landed at UMMS, from EPWA, flight was Ok, no issue with lights or kln, but I had something with the HSI, when doing the LOC approach on UMMS, it seems that the deviation needle on the HSI only responds to the course on the pedestal but not the one on the HSI itself is that normal behaviour ? Quote Link to comment Share on other sites More sharing options...
sLYFa Posted January 19, 2017 Share Posted January 19, 2017 8 hours ago, tchou said: is that normal behaviour ? Yes Quote Link to comment Share on other sites More sharing options...
tchou Posted January 19, 2017 Share Posted January 19, 2017 Ok, thanks, I think it didn't do that before, maybe my memory is not good. Quote Link to comment Share on other sites More sharing options...
Pavel1982 Posted January 19, 2017 Share Posted January 19, 2017 Guys, tell me. Updated to version 1.1.5. When activated, entering the serial number fixed it. What is the trouble? HELP Quote Link to comment Share on other sites More sharing options...
Vantskruv Posted January 21, 2017 Share Posted January 21, 2017 Despite cluttering up this space, I just want to say thank you Felis! Quote Link to comment Share on other sites More sharing options...
tchou Posted January 22, 2017 Share Posted January 22, 2017 Hi felis, no special issue during the flights I did, I just noticed a pressure gauge going to 0 kg/cm2 whenever the engine is off.. on motor 3, the pressure indicated when the engine is on is the same as the other engines... My Log.txt file is included in case you see something in it...; regards Tchou Log.txt Quote Link to comment Share on other sites More sharing options...
tchou Posted January 28, 2017 Share Posted January 28, 2017 Hello Felis, I had issues with last version, -I did noticed that there are some power micro outage in the plane : in flight you get the nose landing gear light blinking from time to time. and the ground radar/info screen keeps reinitialize when on ground. -also some big instabilities when climbing or descending under M or V mode, the plane tend to act as a tree leave, for example, when descending, the plane dive quite hard then the plane self right itself, even going up, to then nearly stall and dive again..., i had the same (but inverted) behavior while climbing. -the compass in the "info" screen doesn't stabilize but keeps turning and turning Quote Link to comment Share on other sites More sharing options...
Julik Posted February 16, 2017 Share Posted February 16, 2017 @Felis experimented a bit with 1.1.5 but reverted to 1.1.3 for now. On 1.1.5 I am sometimes experiencing OpenGL sim crashes. It only happens with that particular version, and the crash logs do not indicate towards SASL but to empty OpenGL buffers that get rendered together with the scenery. My suspicion is that SASL is injecting buffers somewhere in the rendering pipeline - but since the SASL development process has become completely closed and opaque I can't verify. I've reported on the x-plane questions site here http://questions.x-plane.com/7244/x-plane-10-5-gl-crash-on-2013-macpro and I'm positive it only happens with the 1.1.5 version. If I place the SASL binaries from 1.1.3 in the 1.1.5 version it works. However after about 30-40 minutes of flying all the SASL overlays shut down (disappear). By overlays I mean: All the digital instruments (КУРС-МП and COM frequencies, the VBE/TCAS, weather radar etc - basically all instruments for which some SASL display feature for digital gages is used The left-side menu of the plane (so it's not possible to open overlay panels) All the other systems work normally during such an outage. I haven't seen any failures related to that and the failures in general are disabled. If I force-reload SASL from the plugin enable/disable the plane enters an extremely unreliable state but all the digital gages and overlay menus come back. I haven't seen it on the default 1.1.5 version. It might have to do with the fact that on v. 1.1.5 I have the KLN installed. I didn't even bother installing it on 1.1.3 (I think it was incompatible encryption-wise). The gauge blackout happened without even enabling the KLN (but I would assume it did load including all of it's data). I'm almost considering rewriting the KLN in C++, unless it's not related. For those who missed Felis' posts on other forums - one of the bugfixes in 1.1.5 is exactly the same as this one - https://github.com/julik/xp-an24/commit/ccda9e547bb701ef2c9a3cbe01c6af3e763fa284 (it fixes the bug where when you fly across the international date line the gyros will instantly rotate by ~30 degrees) Quote Link to comment Share on other sites More sharing options...
Felis Posted April 4, 2017 Author Share Posted April 4, 2017 v 1.1.6: https://yadi.sk/d/ZIN529H83GfAP5 https://dl.dropboxusercontent.com/u/3443224/Tu154_Felis_v1.1.6.zip http://felis-planes.com/upload/tu154/Tu154_Felis_v1.1.6.zip KLN: https://yadi.sk/d/MHW8X9z9sUd4i Changes for v1.1.6 + Fixed engines RPM in XP11 + Generators fixed in XP11 + Shutting down the entire acf when loaded with engines running in XP11 fixed - Added crew voices. I'm still working on it. Will add english phrases and polish sound samples soon! 1 Quote Link to comment Share on other sites More sharing options...
Havena Posted April 5, 2017 Share Posted April 5, 2017 this update seems quite good. I managed a few patterns at Dallas (DFW), no problems at all. The compass in the info monitor is spinning around a bit, that's it. Thank you very much for making it run in X-Plane 11. P.S.: I love the new russian announciators. Pretty cool stuff. Quote Link to comment Share on other sites More sharing options...
Vantskruv Posted April 5, 2017 Share Posted April 5, 2017 Thank you Felis, very much appreciated! Off topic, sooner or later I will try to update XNVU to support reading X11 airac. Scratching my head sorting and creating airways... 1 Quote Link to comment Share on other sites More sharing options...
TheSkipjack95 Posted April 5, 2017 Share Posted April 5, 2017 Is 1.1.6 XP11 only ? I'm still waiting to get 11 so I wondered if it's usable in 10. Still absolutely loving the aircraft. Quote Link to comment Share on other sites More sharing options...
Oleg_Tr Posted April 5, 2017 Share Posted April 5, 2017 Спасибо. ))) Вовремя. Quote Link to comment Share on other sites More sharing options...
Willhelm Posted April 5, 2017 Share Posted April 5, 2017 Thank you Felis. Very nice update. Quote Link to comment Share on other sites More sharing options...
zwyx Posted April 5, 2017 Share Posted April 5, 2017 Version 1.1.6 is running fine both in XP11.0 and XP10.51. But on the moment testing TCAS screen for latitude and UTC time - these values are fine, but compass above them seems strange. With adjusted compasses and standing aircraft heading 80 it displays 180 in XP10 and shows constantly changing values in XP11. Quote Link to comment Share on other sites More sharing options...
VinodKumar747 Posted April 12, 2017 Share Posted April 12, 2017 (edited) I love this aircraft but does this xp11 version have PBR? would be an instant buy for me if it did! Edited April 12, 2017 by VinodKumar747 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.