Jump to content

Tu154 updates


Felis

Recommended Posts

  • 2 weeks later...
  • 3 weeks later...
On 5/23/2020 at 11:36 AM, tupol154b2 said:

 

Generators are connected, I'm doing everything right. 

Even if I flew on batteries, why does the icon with ground services disappear?

I got the same issue - all screens stopped working, and the icon for the popups disappeared.

Link to comment
Share on other sites

  • 3 weeks later...
15 hours ago, Pedro Carvalho said:

Did you buy it?

Ah, so if someone has issues with an aircraft it's pirated? Nice bit of jumping to conclusions there.

Haven't had the issue since. Think it was a Vulkan issue.

Edited by dipperdolphin
Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

Get the 2.0.6 version here:

https://drive.google.com/drive/u/0/folders/1x0fqCgNwcAiETf5AxVHYP8TogNgPMf4E

or here: https://www.dropbox.com/s/mxz21t3uagw6h8s/Tu154_Felis_v2.0.6.zip?dl=0
https://www.dropbox.com/s/7ppi18v12dj1q01/KLN90_2.0.6.ZIP?dl=0

Changelog:

++ fixed gear animation during replay
++ radio compatible with 8.33 kHz standart
++ changed logic for toe brakes axies handling
++ nosewheel can be controlled via nose tiller
++ changed throttle threshold for "deploy landing gear" horn

Keep in mind, that this model is not compatible with experimental flight model. Check that before you fly. I will try to update it, but that will take much more time. It's like making dynamics from grounds.

 

  • Like 3
Link to comment
Share on other sites

Ok. Last updates are uploaded. You can download the pack here:

https://drive.google.com/drive/folders/1x0fqCgNwcAiETf5AxVHYP8TogNgPMf4E

Full changelog for 2.0.6:

++ gear animation during replay
++ radio compatible with 8.33 kHz standart
++ changed logic for toe brakes axies handling
++ nosewheel can be controlled via nose tiller. set on GND panel
++ added Better Pushback compatibility
++ changed throttle threshold for "deploy landing gear" horn
++ landing gear extended after crash
++ DH signal is now OFF, when radioaltimeter is OFF 
++ RMI gauge needles will remain in last position, if ADF or NAV source is OFF
++ Courses on HSI are saved correctly between flights
++ Compass system latitude setting is now saves between flights
++ APU failures added to failures tab and can be fixed there
++ Engines will turn off, if no fuel boost above 9500m

  • Thanks 2
Link to comment
Share on other sites

16 hours ago, Felis said:

Ok. Last updates are uploaded. You can download the pack here:

https://drive.google.com/drive/folders/1x0fqCgNwcAiETf5AxVHYP8TogNgPMf4E

Full changelog for 2.0.6:

++ gear animation during replay
++ radio compatible with 8.33 kHz standart
++ changed logic for toe brakes axies handling
++ nosewheel can be controlled via nose tiller. set on GND panel
++ added Better Pushback compatibility
++ changed throttle threshold for "deploy landing gear" horn
++ landing gear extended after crash
++ DH signal is now OFF, when radioaltimeter is OFF 
++ RMI gauge needles will remain in last position, if ADF or NAV source is OFF
++ Courses on HSI are saved correctly between flights
++ Compass system latitude setting is now saves between flights
++ APU failures added to failures tab and can be fixed there
++ Engines will turn off, if no fuel boost above 9500m

this is different from the version 2.0.6 from a few days ago?? the version numbers are the same

Link to comment
Share on other sites

OK, I guess I found that shutting off the four valves marked "Service tank" above the fuel shutoff valves will shut engines off. However, after this I was unable to start the APU at altitude to restart engines. What is the correct procedure for in-flight restart and are there any limitations?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...