Do you know the dataref for showing the Pilot, I can't seem to find it.

I know the CoPilot is: sim/cockpit/switches/fasten_seat_belts

Or, it it the other way around, not sure.

Thank you.

For more information and instructions, please refer to the announcement topic:

https://forums.x-plane.org/forums/topic/345044-notice-skunkcrafts-support-discontinued/

I'm finding the Dynali difficult to control especially on approach and landing. No probs with the Robinson R66. What are the recommended sensitivity settings for this rotorcraft?

Purchased the Dynali today and noticed a Sport version was included but the manual manual does not mention the Sport's specifics.

What are the differences between them both?

Thanks in advance.

RELEASED!!!

MAJOR UPDATE RELEASE - VSKYLABS Dynali H-3 v3.0.

Update includes complete flight dynamics overhaul, countless visualization upgrades, new FMOD sounds package and more! Stay tuned!!!

v3.1 update was just released.

The update adds an additional fuel-meter (float-leveler type), in-between the seats, on the back wall (more convenient to some pilots, and an actual 'feature' in some real-world Dynali H3 variants).

But I have a problem: I can't get an ATC. XP ATC reads "Your aircraft has no power".

AUX is switched on, Garmin and transponder are on. What is wrong? Thanks.

first thanks and congratulation for this very nice work.

i bought the H3 and i love it.

quick and simple question : is it possible to hide the pilote inside the cockpit.

best

Pascal.

Starting NOW!

All VSKYLABS products for X-Plane 12 are using the SkunkCrafts updater!

Please RE-DOWNLOAD your VSKYLABS products to be able to get future updates!

Is it implemented, or  am I doing something wrong?

Cheers and Beers

Bill

New project version is including an additional variant: The latest Dynali 'Sport' design, which is including a new tail design and a new carbon-skids design which are improving stability and aerodynamic efficiency throughout the flying envelope. The new skids design is also wider, improving ground handling and stability.

The included Paint-Kit was also updated to include the new tail section.

To update your project simply load the VSKYLABS Dynali H3 in X-Plane 11, and the included STMA autoupdater plugin will fetch the update.

The Store package has been updated with the latest v1.1 build as well, and it is highly recommended to download it as it reduces the gap between the current and the future builds. Simply log into your store account and re-download the project.

Thanks

Arndt

Thanks

Arndt

Version v1.1a was just injected into the package via the STMA autoupdater.

The update is in fact a bug-fix update:

• CHT and Oil-temp gauges readings (in the analog gauges) was tuned to match the digital reading below 100 degrees C.
• Cooling fans efficiency tuneup to allow more prolonged hovering time without exceeding maximum temps.

IMPORTANT:
Flying conditions involves a wide-range scales of airspeed, OAT and flight level throughout the entire engine operational envelope. The powerful cooling fans are being initiated automatically above quite a low threshold, to allow prolonged hovering operations (this is both in the real-world H3 and in the VSKYLABS H3). When flying in cold-weather conditions, monitor your engine temps and if needed, pull out the fans CB's to allow engine operations within limits.

A followup tuneup to the cooling system may be required in the near future, as various flying situations and pilots operations will be gathered! 😎

As with all VSKYLABS projects...the project is under constant development, following a scheduled development road-map which is including continuous refinements and improvements in all aspects, as well as the implementation of new features.

Version v1.0 is *only* a milestone in the project's evolution path, indicating that it is mature enough to be thrown into deep water.

In the main folder, a POH-Manual folder is existing, containing instructions and 'ESSENTIAL' information for fast-conversion/operation (key assignments etc...). Please read it before flight!

no issues and fps is above 60+ all the time, are there any secrests big updates coming around?

would love to have the ability to see rain effects

edit: yes i'm the guy who love airplanes and helicopters that make noise and can sit down and watch wipers pour rain fo the windshield for hours

No mater what I try I cannot get the engine to rev up.  The rotor spins for a short while after start and then slows down because I do not have any engine power.  Governor on or governor off makes no difference.  

However I have a big hit on fps down to 20 fps compared to 30 fps with other helicopters. Most probably due to the high details.
Im using XP10.50b9 (Vulkan/Metal) running on MAC

__

Lars