I fly real Robin DR400 and in France we use the unit of km/h for the IAS, I can't find on the .org/store a Robin DR400 with the classic IAS Indicator with the two units (like I show you in the join pieces).

I know it will be difficult to obtain it but, is it possible for you to create an update of your Robin DR400 with two choices at the start up, one with the actual airspeed indicator and one with the common we found in France please ?

Thanks a lot

When I use the DR400 in VR mode the arrow that bring the menu on the left side when playing on the screen, is in the middle of the view.

Is there a way to take it off ?

Thanks

To implement a new plane, Mac OS has to change the KERNEL file. Usually the system does not allow it. So you have to change this in the deeper System.
For the Process just watch this video:

After I changed it, everything was working pretty well.
 

I found the fix. The left landing light is number 2, the right is number 3, but they don't light up the ground unless landing light number 1 is also turned on. With a cold and dark start, it's off.

The workaround is to map a key to "Flight Controls > Lights > Landing light 01 on" (or toggle), or "Landing lights on" (or toggle). After turning the first light on, the 3D cockpit switches will work fine for the left and right landing lights.

I've written a Rust plugin which automates this on aircraft startup: https://github.com/JDeeth/dr400tweaks

I tried to report this via the JustFlight website but, as I bought the aircraft through the x-plane.org store, I don't have a JustFlight account and can't create a ticket there!

I'm hopefully starting lessons soon in a DR400/120 - if I wanted a 120hp version of the JustFlight DR400, I could just adjust the engine power in Planemaker from 180hp to 120hp - but would I need to do anything else too?

For the dr400 (justfly) with REP I try to find the yaw sensitive configuration which keep the aircraft stable during taxy for takoff.

Log.txt SASLLog.txt

When starting the JF DR400 'cold and dark' (new flight, engines not running):
Although all systems should be shut off in this type of start up, I have noticed the following:
- The Rotating beacon breaker is pushed in (On)
- The L- and R- Landing Lights breakers are pushed in (On)
After the Master Switch (battery) is engaged:
- The Garmin GNS 430, Bendix/King 97A/T50 Com2 and KN64 DME are all On, even if they were switched Off at the end of the last flight.

- (The Garmin GMA 340 is always On: it can't be turned off with the Left large knob).

These aren't critical issues, but If they are not pre-set that way by design I was hoping they could be fixed in a future aircraft update if possible.

Thanks.

While performing the external pre-flight walk-around (in daytime), I discovered that when checking the Nav lights and Landing lights (breakers were on), both lights on the left (pilot-side) were on, but both right wing lights were not illuminated. After setting the time to after-dark, both Nav lights were illuminated and the landing lights were lighting up the ground on both sides, but the light on the right wing was dark.

This is a minor cosmetic bug (or feature? – those landing lights draw a lot of battery power when the engine isn’t running!), but I wanted to point it out in case it would be a simple fix in the next update.

The JustFlight DR400 is a great aircraft – I loved it in XP11 and am glad for the update to XP12!

I get this error window. Log file also attached.

Thanks

Log.txt

One image is default running on the runway. Second image is with the instrument lighting all the way down and both landing lights off.

Log.txt

The store page of DR400 says that the PSD file paintkit will be included

But there is no that thing in the aircraft fold

Could you please give it to me?

Thanks

I've purchased the DR400 through the X-Plane.org store a few years back.
Now I'm getting an error when trying to activate it, saying the activation limit has been reached.
The JustFlight support page says I should create a support ticket on their support forum.
However, as I have not purchased it through their website I don't have an account for that forum.
It appears the only way to create an account is by purchasing a product through their website.

How will I be able to reset the activation count?

@NoJoe

The Automatic stabilization is deactivated.

I like to fly with 100% stabilization assistance and have found that in the joystick settings the automatic stabilization is always switched off when loading this aircraft. Other planes adopt my settings.

Is this a known issue or is it specific to this aircraft?

Thanks

the model was delivered with a serial number, but where have I to introduce it ?

I am having some major issues with Com 1 and Com 2 on this bird, there are times it is working and times Audio from PE is only on Com 2 even when Com 1 is selected.

Is anyone else having these issues?  I want to know before I submit a ticket with them on justflight's website.

Thanks

Can someone do a Avitab Mod integration to this airplane please.  It would be awesome, the Aerobask legendary DR401 has it and it will be awesome to have it on this plane too.

Thanks

I can only turn on the avionics by using avionic preset in my Honeycomb yoke.

So could someone clear me where the button is?